Light-curing of calcium hydroxide-based liners: pH analysis and calcium ion release / Fotoativação de forradores a base de hidróxido de cálcio: análise de pH e liberação de íons cálcio

Objective: Compare the pH values and calcium ion release of calcium hydroxide-based liner materials before and after light-curing. Material and Methods: The materials evaluated were: hydrox-cal white (HW), hydrox-cal dentin (HD), Biocal (BC) and UltraBlend Plus (UB). 120 samples of the liner materials were inserted into a PVC tube (n=15). The samples from HW+A, HD+A, BC+A and UB+A were subjected to photoactivation. The other groups HW+N, HD+N, BC+N and UB+N were only inserted in a glass tube with deionized water. The pH was measured 24 hours and 14 days after the inclusion of the samples with the aid of a pH meter. The calcium release was analyzed with the aid of an atomic absorption spectophotometer at 24h and 14 days. The results were submitted to the Shapiro-Wilk test, followed by ANOVA and Tukey test (p=0.05). Results: In 24h, the groups that were not light cured showed the highest pH values (p<0.05). In 14 days, BC+N and BC+A demonstrated the lowest pH values. The groups that were not light cured also showed higher calcium release values in 24h and 14 days (p<0.05). Conclusion: Photoactivation of calcium hydroxide-based liner materials negatively interferes with calcium ion release, as well as with pH.(AU)

Objetivo: Comparar os valores de pH e liberação de íons cálcio de materiais forradores à base de hidróxido de cálcio antes e depois da fotopolimerização. Material e métodos: Os materiais avaliados foram: Hidrox-cal branco (HW), Hidrox-cal dentina (HD), Biocal (BC) e UltraBlend Plus (UB). 120 amostras dos materiais de revestimento foram inseridas em um tubo de PVC (n=15). As amostras de HW +A, HD+A, BC+A e UB+A foram submetidas à fotoativação. Os demais grupos HW +N, HD+N, BC+N e UB+N foram inseridos apenas em um tubo de vidro com água deionizada. O pH foi medido 24 horas e 14 dias após a inclusão das amostras com o auxílio de um medidor de pH. A liberação de cálcio foi analisada com o auxílio de um espectrofotômetro de absorção atômica em 24h e 14 dias. Os resultados foram submetidos ao teste de Shapiro-Wilk, seguido de ANOVA e teste de Tukey (p=0,05). Resultados: Em 24h, os grupos não fotopolimerizados apresentaram os maiores valores de pH (p<0,05). Em 14 dias, BC+N e BC+A apresentaram os menores valores de pH. Os grupos não fotopolimerizados também apresentaram maiores valores de liberação de cálcio em 24h e 14 dias (p<0,05). Conclusão: A fotoativação de materiais de revestimento à base de hidróxido de cálcio interfere negativamente na liberação de íons cálcio e no pH (AU)

Pulpectomies with Iodoform Versus Calcium Hydroxide-Based Paste: A Preliminary Randomised Controlled Clinical Trial

ABSTRACT Objective: To compare clinical and radiographical pulpectomy outcomes in primary teeth filled with different pastes. Material and Methods: The sample included thirty-eight teeth indicated for pulpectomy due to irreversible pulp inflammation or necrosis from thirty patients (2 to 9 years old). The first appointment comprised chemomechanical preparation (2.5% sodium hypochlorite), smear layer removal (6% citric acid), intracanal dressing and temporary restoration. Seven days later, teeth were randomly assigned to filling with iodoform (IP) or calcium hydroxide with zinc oxide (CHZO) based pastes and temporarily restored. Final restoration (composite resin) occurred at the 3rd appointment. Data from baseline, 6 and 12 months were analysed using descriptive and inferential statistics (p≤0.05). Results: The overall frequency of success was 63.6% (n=21), with no significant difference between groups (IP=62.5% n=10; CHZO=64.7% n=11, p=0.59). Multiradicular teeth, overfilled canals and teeth whose coronal restoration have been lost were significantly associated with failure (p=0.01, p=0.04 and p<0.001, respectively). Conclusion: After 12 months, both pastes showed similar outcomes and can be used as good options for pulpectomies in primary teeth. Moreover, tooth location, extent of the root canal filling, and integrity of final restoration during the follow-up influenced the outcome of pulpectomies.

Análise físico-química de balas duras e mastigáveis e o seu efeito desmineralizante em esmalte bovino / Physico-chemical analysis of hard and soft candies and their demineralizing effect in bovine enamel

Objetivo: avaliar o potencial cariogênico de balas duras e mastigáveis e seu potencial desmineralizante em esmalte bovino. Métodos: foram selecionadas 30 balas de diferentes marcas, divididas em balas duras (n=11), Tic Tac®, Halls® e IceKiss®, e balas mastigáveis (n=19), Lílith®, Azedinha®, Mentos Rainbow® e Dori Gomets®. As balas foram dissolvidas em água destilada (1:10) e foram avaliados pH, acidez titulável (ATT) e presença de sólidos solúveis totais (SST/°Brix). Na ciclagem erosiva, 40 espécimes de esmalte bovino foram divididos em quatro grupos (n=10): GCN ­ saliva artificial; GCP ­ ácido clorídrico; GT1 ­ solução da bala Lílith® maçã verde; GT2 ­ solução da bala IceKiss® extraforte. O desafio erosivo foi realizado por 2 minutos, 4x/dia, segui-do de 2 horas de imersão em saliva artificial durante cinco dias. Resultados: os valores de pH para as balas duras e mastigáveis variaram de 2,88 a 5,53 e de 2,73 a 4,16, respectivamente. ATT em pH 5,5 variou de 0,07 mL a 39,40 mL de NaOH 0,1 N, para as balas duras, e de 1,53 mL a 35,83 mL, para balas mastigáveis. ATT em pH 7,0 variou de 0,2 mL a 49,13 mL de NaOH, para balas duras, e de 2,37 mL a 49,97 mL, para as mastigáveis. O conteúdo de SST de todas as balas duras foi superior a 8,5°Brix, já entre as mastigáveis variou de 5,3 a 8,83°Brix. O GCP apresentou maior desmineralização que GCN e GT2 (p<0,05). Conclusão: a maioria das balas duras e mastigáveis dissolvidas em água destilada mostraram-se potencialmente erosivas e cariogênicas.(AU)

Objective: evaluate the cariogenic potential of hard and soft candies and their demineralizing potential in bovine enamel. Methods: 30 candies of different brands were selected, divided into hard candies (n=11): Tic Tac®, Halls® and IceKiss® and soft candies (n=19): Lílith®, Azedinha®, Mentos Rainbow® and Dori Gomets®. The candies were dissolved in distilled water (1:10) and pH, titratable acidity (TT) and presence of total soluble solids (SST/°Brix) were evaluated. In erosive cycling, 40 specimens of bovine enamel were divided into four groups (n=10): GCN - artificial saliva; GCP - hydrochloric acid; GT1 - Lilith® apple green candy solution; GT2 - IceKiss® Extra Strong candy Solution. The erosive challenge was performed for 2 minutes, 4X/day, followed by 2 hours of immersion in artificial saliva for five days. Results: pH values for hard and soft candies ranged from 2.88 to 5.53 and 2.73 to 4, respectively. ATT at pH 5.5 varied from 0.07 mL to 39.40 mL of 0.1 N NaOH for hard candies and 1.53 mL to 35.83 mL for soft candies. ATT at pH 7,0 varied from 0.2 mL to 49.13 mL of 0.1 N NaOH for hard candies and from 2.37 mL to 49.97 mL for soft candies. The content of SST of all hard candies was higher than 8.5 °Brix and for soft candies, varied between 5.3 to 8.83 °Brix. The GCP group showed greater demineralization than GCN and GT2 (p<0.05). Conclusion: most hard and soft candies dissolved in distilled water were potentially erosive and cariogenic.(AU)

Durabilidade da união à dentina e liberação de cálcio promovidas por sistemas adesivos experimentais com adição de hidróxido de cálcio / Durability of the bond to dentin and calcium release promoted by experimental adhesive systems with the addition of calcium hydroxide

Objetivo: Este estudo investigou a liberação de cálcio (CaR) e estabilidade de adesão à dentina em longo prazo (DBS) de sistemas adesivos autocondicionantes experimentais contendo hidróxido de cálcio. Metodologia: Quatro sistemas adesivos foram formulados incluindo monômeros UDMA, HEMA, GDMA-P, TPO e difenil iodônio como sistema fotoiniciador, e etanol / água como solvente com diferentes frações de massa de hidróxido de cálcio: 0% (controle), 1%, 2% e 4%. O DBS foi medido pelo método de microtração de resistência de união em máquina de ensaio de microtração. O terço médio da dentina de 24 terceiros molares humanos (n = 6) foi usado para unir os sistemas adesivos a uma resina composta. Amostras em forma de palitos (1 mm2 ) foram obtidas após 24 horas de imersão em água destilada e testadas imediatamente e após 12 meses de armazenamento em água. Os dados foram avaliados estatisticamente por meio de ANOVA de dois fatores e pós-teste de Tukey (p <0,05). O CaR foi avaliado por meio de espectrofotômetro. Os espécimes em discos (6,0 mm de diâmetro x 0,3 mm de espessura) foram produzidos (n = 4) e imersos em água destilada. A concentração de cálcio foi medida após 3 h até 168 h. Resultados: Para DBS, os sistemas adesivos contendo 0%, 1% e 4% de hidróxido de cálcio apresentaram médias estatisticamente semelhantes entre os pontos de tempo imediato (24h) e 12 meses. O sistema adesivo contendo 2% de hidróxido de cálcio apresentou resistência de união estatisticamente maior em 12 meses (p = 0,001). Nenhum material liberou cálcio até 168 h após a fotoativação. Conclusão: A inclusão de hidróxido de cálcio a 2% resultou na melhora da durabilidade de união à dentina a longo prazo. No entanto, a inclusão de hidróxido de cálcio aos sistemas adesivos experimentais testados não foi capaz de liberar cálcio (AU).

Objective: This study investigated the calcium release (CaR) and long-term dentin bonding stability (DBS) of experimental self-etching adhesive systems containing calcium hydroxide. Methodology: Four adhesive systems were formulated including UDMA, HEMA, GDMA-P, TPO and diphenyl iodonium monomers as photoinitiator system, and ethanol/water as solvent with different mass fractions of calcium hydroxide: 0% (control), 1%, 2% and 4%. DBS was measured by the microtensile bond strength method in a microtensile testing machine. The middle third of dentin from 24 human third molars (n = 6) was used to bond the adhesive systems to a composite resin. Stick-shaped samples (1 mm2) were obtained after 24 hours of immersion in distilled water and tested immediately and after 12 months of storage in water. Data were statistically evaluated using two-way ANOVA and Tukey's post-test (p < 0.05). CaR was evaluated using a spectrophotometer. Disc specimens (6.0 mm in diameter x 0.3 mm thick) were produced (n = 4) and immersed in distilled water. Calcium concentration was measured after 3 h to 168 h. Results: For DBS, adhesive systems containing 0%, 1% and 4% calcium hydroxide had statistically similar means between the immediate time points (24h) and 12 months. The adhesive system containing 2% calcium hydroxide had a statistically higher bond strength in 12 months (p = 0.001). No material released calcium up to 168 h after photoactivation. Conclusion: The inclusion of 2% calcium hydroxide resulted in improved long-term bond strength to dentin. However, the inclusion of calcium hydroxide in the experimental adhesive systems tested was not able to release calcium (AU).

Effect of preheating on cytotoxicity and physicochemical properties of light-cured calcium-based cements / Efeito do pré-aquecimento na citotoxicidade e propriedades físico-químicas de cimentos à base de cálcio fotopolimerizáveis

ABSTRACT The aim of this study was to evaluate the degree of conversion, cytotoxicity, solubility and pH of photopolymerizable calciumbased cements submitted to preheating. The degree of conversion was analyzed by Fourier transform infrared, cytotoxicity by the MTT test and solubility through loss of mass. The data were subjected to statistical tests (ANOVA / Tukey's, p<0.05). The photopolymerizable materials showed a low degree of conversion, regardless of preheating. All materials caused a reduction in cell viability at 24 hours and 7 days, with the Dycal (control) being more cytotoxic. Heat had a positive effect on Biocal at 7 days. Dycal is the most soluble material. Heat had no effect on the solubility or pH of the polymerizable materials. It is concluded that photopolymerizable calcium-based cements have a low degree of conversion and are soluble, which results in mild to moderate cytotoxicity.

RESUMO O objetivo do presente estudo foi avaliar o grau de conversão, citotoxicidade, solubilidade e pH de cimentos à base de cálcio fotopolimerizáveis submetidos a pré-aquecimento. O grau de conversão foi analisado por espectroscopia no infravermelho com transformada de Fourier, a citotoxicidade pelo teste de MTT e a solubilidade através da perda de massa. Os dados foram submetidos a testes estatísticos (ANOVA/Tukey, p<0,05). Os materiais fotopolimerizáveis apresentaram baixo grau de conversão, independente do pré-aquecimento. Todos os materiais causaram redução da viabilidade celular nas análises de 24 horas e 7 dias, sendo que o Dycal (controle) apresentouse mais citotóxico e o calor apresentou efeito positivo sobre o Biocal na análise de 7 dias. O Dycal é o material mais solúvel e o calor não causou efeito na solubilidade e pH dos materiais polimerizáveis. Assim, conclui-se que os cimentos à base de cálcio fotopolimerizáveis apresentam baixo grau de conversão e são solúveis, que resulta em citotoxicidade suave e moderada.

Antimicrobial activity of intracanal dressings composed by natural products associated to chlorhexidine and its influence on dentinal colour change / Avaliação da ação antimicrobiana de medicações intracanais à base de produtos fitoterápicos associados à clorexidina e sua influência na alteração de cor da estrutura dentinária

Purpose: evaluate the antimicrobial activity of intracanal dressings and their influence on dentinal colour changes. Material and methods: eighty single-rooted human extracted teeth were decoronated and divided into eight groups (n=10) according to intracanal dressing protocols inserted into the root canals: G1­distilled water (DW); G2­2% chlorhexidine gel (CHX); G3­calcium hydroxide (Ca[OH]2)+DW; G4­grape seed extract (GSE)+DW; G5­ginger extract (GE)+DW; G6­Ca(OH)2+CHX; G7­GSE+CHX; and G8­GE+CHX. The antimicrobial activity was evaluated by colony-forming units (CFUs) counting and dentinal colour changes was evaluated by digital spectrophotometry. Data were statistically analysed by One-way ANOVA followed by Tukey´s post hoc test (antimicrobial evaluation) and non-parametric Wilcoxon followed by the Mann- Whitney-U test (colour change evaluation) (α=0.05). Results: the highest bacterial reduction was observed in groups 4, 6, 7 and 8, with no significant difference between them (p<0.05). Groups 4 and 7 showed the highest medians of dentinal colour change (p<0.05). Conclusion: the addition of CHX improved the antimicrobial activity of GE-based intracanal dressing, with no effect in GSE-based intracanal dressing; moreover, these protocols induced significant dentinal colour changes. (AU)

Objetivo: avaliar a atividade antimicrobiana de medicações intracanais e sua influência na alteração da cor dentinária. Materiais e métodos: oitenta dentes humanos extraídos unirradiculares foram seccionados e divididos em oito grupos (n = 10), de acordo com os protocolos de medicação intracanal inseridos nos canais radiculares: água destilada G1 (DW); G2-2% de gel de clorexidina (CHX); hidróxido de cálcio G3 ­ (Ca [OH] 2) + DW; extrato de semente de uva G4 (GSE) + DW; extrato de gengibre G5 (GE) + DW; G6- Ca (OH) 2 + CHX; G7 ­ GSE + CHX; e G8-GE + CHX. A atividade antimicrobiana foi avaliada por contagem de unidades formadoras de colônias (UFCs) e as alterações de cor dentinária foram avaliadas por espectrofotometria digital. Os dados foram analisados estatisticamente por ANOVA one-way, seguida pelo teste post hoc de Tukey (avaliação antimicrobiana) e Wilcoxon não paramétrico, seguido pelo teste de Mann- Whitney-U (avaliação da mudança de cor) (α = 0,05). Resultados: a maior redução bacteriana foi observada nos grupos 4, 6, 7 e 8, sem diferença significativa entre eles (p < 0,05). Os grupos 4 e 7 apresentaram as maiores medianas da alteração da cor dentinária (p < 0,05). Conclusão: a adição de CHX melhorou a atividade antimicrobiana da medicação intracanal baseado em GE, sem efeito na medicação intracanal baseado em GSE; além disso, esses protocolos induziram alterações significativas na cor dentinária.(AU)

Effect of a calcium hydroxide-based intracanal medicament containing N-2-methyl pyrrolidone as a vehicle against Enterococcus faecalis biofilm

Abstract This study investigated the effect of a calcium hydroxide (CH) paste (CleaniCal®) containing N-2-methyl pyrrolidone (NMP) as a vehicle on Enterococcus faecalis (E. faecalis) biofilms compared with other products containing saline (Calasept Plus™) or propylene glycol (PG) (Calcipex II®). Methodology Standardized bovine root canal specimens were used. The antibacterial effects were measured by colony-forming unit counting. The thickness of bacterial microcolonies and exopolysaccharides was assessed using confocal laser scanning microscopy. Morphological features of the biofilms were observed using field-emission scanning electron microscopy (FE-SEM). Bovine tooth blocks covered with nail polish were immersed into the vehicles and dispelling was observed. The data were analyzed using one-way analysis of variance and Tukey tests (p<0.05). Results CleaniCal® showed the highest antibacterial activity, followed by Calcipex II® (p<0.05). Moreover, NMP showed a higher antibacterial effect compared with PG (p<0.05). The thickness of bacteria and EPS in the CleaniCal® group was significantly lower than that of other materials tested (p<0.05). FE-SEM images showed the specimens treated with Calasept Plus™ were covered with biofilms, whereas the specimens treated with other medicaments were not. Notably, the specimen treated with CleaniCal® was cleaner than the one treated with Calcipex II®. Furthermore, the nail polish on the bovine tooth block immersed in NMP was completely dispelled. Conclusions CleaniCal® performed better than Calasept Plus™ and Calcipex II® in the removal efficacy of E. faecalis biofilms. The results suggest the effect might be due to the potent dissolving effect of NMP on organic substances.

Influence of chlorhexidine and zinc oxide in calcium hydroxide pastes on pH changes in external root surface

Abstract The objective of this study was to assess the influence of chlorhexidine (liquid and gel) and zinc oxide in calcium hydroxide (CH) pastes on root pH in simulated external resorption. One hundred human anterior teeth with a single root canal were selected. After decoronation and root canal instrumentation, the specimens were divided into 4 experimental groups and 1 control group (without intracanal paste): CH + saline (CH+S), CH + 2% chlorhexidine liquid (CH+ CHX), CH + 2% chlorhexidine gel (CH+ CHXg), and CH + 2% chlorhexidine gel + zinc oxide (CH+ CHXg+ZnO). pH was measured using a microelectrode at 3 and 24 h, and 1, 2, 3, and 4 weeks after inserting intracanal pastes. Data were analyzed statistically using an ANOVA and Tukey's test (p < 0.05). The CH+CHXg+ZnO group had the highest pH values throughout (p<0.05). The CH+S and CH+ CHX groups had the highest pH values after 1 week and the CH+ CHXg group after 2 weeks. CH+ CHXg maintained the highest pH until the fourth week compared with CH+ CHX (p < 0.05). The control group remained at a neutral pH at all evaluated times. It can be concluded that chlorhexidine solution or gel maintained the alkaline pH of CH, and chlorhexidine gel allowed a slower decrease in pH over time. CH+ CHXg+ZnO showed the highest pH values and was an effective intracanal medication for maintaining alkaline root pH in the area of resorption.

Comparison between calcium hydroxide mixtures and mineral trioxide aggregate in primary teeth pulpotomy: a randomized controlled trial

Abstract Objectives: To evaluate the effect of calcium hydroxide (CH) associated with two different vehicles as a capping material for pulp tissue in primary molars, compared with mineral trioxide aggregate (MTA). Methodology: Forty-five primary mandibular molars with dental caries were treated by conventional pulpotomy using one of the following materials: MTA only (MTA group), CH with saline (CH+saline group) and CH with polyethylene glycol (CH+PEG group) (15 teeth/group). Clinical and periapical radiographic examinations of the pulpotomized teeth were performed 3, 6, and 12 months after treatment. Data were tested by chi-squared analysis and a multiple comparison post-test. Results: The MTA group showed both clinical and radiographic treatment success in 14/14 teeth (100%), at all follow-up appointments. By clinical evaluation, no teeth in the CH+saline and CH+PEG groups had signs of mobility, fistula, swelling or inflammation of the surrounding gingival tissue. However, in the CH+saline group, radiographic analysis detected internal resorption in up to 9/15 teeth (67%), and inter-radicular bone resorption and furcation radiolucency in up to 5/15 teeth (36%), from 3 to 12 months of follow-up. In the CH+PEG group, 2/11 teeth (18%) had internal resorption and 1/11 teeth (9%) presented bone resorption and furcation radiolucency at all follow-up appointments. Conclusion: CH with PEG performed better than CH with saline as capping material for pulpotomy of primary teeth. However, both combinations yielded clinical and radiographic results inferior to those of MTA alone.

Cytotoxicity and biocompatibility of a new bioceramic endodontic sealer containing calcium hydroxide

Abstract: This study evaluated the cytotoxicity and biocompatibility of a new bioceramic endodontic sealer (i.e., Sealer Plus BC) in comparison with those of MTA Fillapex and AH Plus. L929 fibroblasts were cultured and Alamar Blue was used to evaluate cell viability of diluted extracts (1:50, 1:100, and 1:200) from each sealer at 24 h. Polyethylene tubes that were filled with material or empty (as a control) were implanted in the subcutaneous tissue of rats. The rats were killed after 7 and 30 d (n = 8), and the tubes were removed for histological analysis. Parametric data was analyzed using a one-way ANOVA test, and nonparametric data was analyzed via the Kruskal-Wallis test followed by the Dunn test (p < 0.05). A reduction in cell viability was observed in the extracts that were more diluted for Sealer Plus BC when compared to that of Control and AH Plus (p < 0.05). However, the 1:50 dilution of the Sealer Plus BC was similar to that of the Control (p > 0.05). Conversely, more diluted extracts of MTA Fillapex (1:200) and AH Plus (1:100 and 1:200) were similar to the Control (p > 0.05). Histological analysis performed at 7 d did not indicate any significant difference between tissue response for all materials, and the fibrous capsule was thick (p > 0.05). At 30 d, Sealer Plus BC was similar to the Control (p > 0.05) and MTA Fillapex and AH Plus exhibited greater inflammation than the Control (p < 0.05). The fibrous capsule was thin for the Control and for most specimens of Sealer Plus BC and AH Plus. Thus, Sealer Plus BC is biocompatible when compared to MTA Fillapex and AH Plus, and it is less cytotoxic when less-diluted extracts are used.

Cytotoxicity of intracanal dressings on apical papilla cells differ upon activation with E. faecalis LTA

Abstract Objective The aim of this study was to investigate the cytotoxic effects of modified triple antibiotic paste and an experimental composition using calcium hydroxide on lipoteichoic acid (LTA)-primed apical papilla cells (APC). Material and Methods Human APC were tested for in vitro cytotoxicity of modified Triple Antibiotic Paste (mTAP - Ciprofloxacin, Metronidazole and Cefaclor at 1:1:1) and of a paste of Ciprofloxacin, Metronidazole and Calcium hydroxide (CMC - 1:1:2) and modified CMC (mCMC - 2:2:1) by using MTT assay. The substances were reconstituted in DMEM at 1,000 µg/mL and » serially diluted before being kept in contact with cells for 1, 3, 5 and 7 days. Further, cells were primed with 1 µg/mL of Enterococcus faecalis LTA for 7 days prior to the viability test with 1,000 µg/mL of each substance. Statistical analysis was performed using one-way analysis of variance (ANOVA) and two-way ANOVA respectively followed by Tukey's post-test. Significance levels were set at p<0.05. Results In the first assay, the higher cytotoxic rates were reached by mTAP for all experimental periods. CMC was found toxic for APC at 5 and 7 days, whereas mCMC did not affect the cell viability. Only CMC and mCMC were able to induce some cellular proliferation. In the second assay, when considering the condition with medium only, LTA-primed cells significantly proliferated in comparison to LTA-untreated ones. At this context, mTAP and CMC showed similar cytotoxicity than the observed for LTA-untreated cells, while mCMC was shown cytotoxic at 7 days only for LTA-primed APC. Comparing the medications, mTAP was more cytotoxic than CMC and mCMC. Conclusion mTAP showed higher cytotoxicity than CMC and mCMC and the effect of topic antimicrobials might differ when tested against apical papilla cells under physiological or activated conditions.

Effectiveness of various irrigation protocols for the removal of calcium hydroxide from artificial standardized grooves

Abstract Objective The aim of this study was to investigate the ability of laser-activated irrigation (LAI), XP-endo Finisher, CanalBrush, Vibringe, passive ultrasonic irrigation (PUI), and conventional syringe irrigation systems on the removal of calcium hydroxide (CH) from simulated root canal irregularities. Material and Methods The root canals of one hundred and five extracted single-rooted teeth were instrumented using Reciproc rotary files up to size R40. The teeth were split longitudinally. Two of the three standard grooves were created in the coronal and apical section of one segment, and another in the middle part of the second segment. The standardized grooves were filled with CH and the root halves were reassembled. After 14 days, the specimens were randomly divided into 7 experimental groups (n=15/group). CH was removed as follows: Group 1: beveled needle irrigation; Group 2: double side-vented needle irrigation; Group 3: CanalBrush; Group 4: XP-endo Finisher; Group 5: Vibringe; Group 6: PUI; Group 7: LAI. The amount of remaining CH in the grooves was scored under a stereomicroscope at 20× magnification. Statistical evaluation was performed using Kruskal-Wallis and Bonferroni-Correction Mann-Whitney U tests. Results Groups 1 and 2 were the least efficient in eliminating CH from the grooves. Groups 6 and 7 eliminated more CH than the other protocols; however, no significant differences were found between these two groups (P>.05). Conclusions Nevertheless, none of the investigated protocols were able to completely remove all CH from all three root regions. LAI and PUI showed less residual CH than the other protocols from artificial grooves.

Crown discoloration promoted by materials used in regenerative endodontic procedures and effect of dental bleaching: spectrophotometric analysis

Abstract Regenerative endodontic procedure (REP) has been proposed as a new approach to treat immature permanent teeth. However, materials used in REP for root canal disinfection or cervical sealing may induce tooth discoloration. Objectives To assess tooth crown’s color after intracanal treatment with triple antibiotic paste (TAP) or calcium hydroxide (CH); cervical sealing with glass ionomer cement (GIC) or mineral trioxide aggregate (MTA); and bleaching with carbamide peroxide. Material and Methods After pulp removal and color spectrophotometer measurement, 50 bovine incisors were divided into 4 experimental groups and one control (untreated). Experiments were performed in phases (Ph). Ph1: TAP (ciprofloxacin, metronidazole, minocycline), TAPM (ciprofloxacin, metronidazole, amoxicillin), DAP (ciprofloxacin, metronidazole), or CH treatment groups. After 1 and 3 days (d); 1, 2, 3 weeks (w); and 1, 2, 3 and 4 months (m), color was measured and medications were removed. Ph2: GIC or MTA cervical sealing, each using half of the specimens from each group. Color was assessed after 1d, 3d; 1w, 2w, 3w; 1m and 2m. Ph3: Two bleaching sessions, each followed by color measurement. Data were analyzed with ANOVA and post-hoc Holm-Sidak method. Results Ph1: Specimens of TAP group presented higher color alteration (ΔE) mean than those of TAPM group. No significant difference was found among TAP or TAPM and CH, DAP or Control groups. Ph2: cervical sealing materials showed no influence on color alteration. Ph3: Different ΔE means (from different groups), prior to bleaching, became equivalent after one bleaching session. Conclusions TAP induces higher color alteration than TAPM; color alteration increases over time; cervical sealing material has no influence on color alteration; and, dental bleaching was able to recover, at least partially, the tooth crown’s color.

Molecular and morphological surface analysis: effect of filling pastes and cleaning agents on root dentin

Abstract The quality of the dentin root is the most important factor for restoration resin sealing and drives the outcome of endodontic treatment. Objective This study evaluated the effect of different filling pastes and cleaning agents on the root dentin of primary teeth using Fourier-transformed Raman spectroscopy (FT-Raman), micro energy-dispersive X-ray fluorescence (µ-EDXRF) and scanning electron microscopic (SEM) analysis. Material and Methods Eighty roots of primary teeth were endodontically prepared and distributed into 4 groups and filled according to the following filling pastes: Control-no filling (CP), Calen®+zinc oxide (CZ), Calcipex II® (CII), Vitapex® (V). After seven days, filling paste groups were distributed to 4 subgroups according to cleaning agents (n=5): Control-no cleaning (C), Ethanol (E), Tergenform® (T), 35% Phosphoric acid (PA). Then, the roots were sectioned and the dentin root sections were internally evaluated by FT-Raman, µ-EDXRF and SEM. Data was submitted to two-way ANOVA and Tukey tests (α=0.05). Results Regarding filling pastes, there was no significant difference in organic content. CP provided the lowest calcium values and, calcium/phosphoric ratio (Ca/P), and the highest phosphoric values. For cleaning agents there was no difference in organic content when compared to the C; however, T showed significantly higher calcium and Ca/P than PA. All groups showed similar results for phosphorus. The dentin smear layer was present after use of the cleaning agents, except PA. Conclusion The filling pastes changed the inorganic content, however they did not change the organic content. Cleaning agents did not alter the inorganic and organic content. PA cleaned and opened dentin tubules.

Evaluation of pH and calcium ion diffusion from calcium hydroxide pastes and MTA / Evaluación del pH y la difusión de iones calciode pastas de hidróxido de calcio y MTA

The aim of this ex vivo study was to evaluate changes in pH andcalcium ion diffusion through root dentin from calcium hydroxide(Ca (OH)2) and mineral trioxide aggregate (MTA) pastes at 7,30 and 60 days; and the relationship between pH and iondiffusion. Thirty­two human premolars were used. Crowns weresectioned and root canals instrumented and filled in with thefollowing preparations: 1) Ca(OH)2 + distilled water (n=7); 2)Ca(OH)2 + 0.1% chlorhexidine gluconate (n=7); 3) MTA +distilled water (n=7); 4) MTA + 0.1% chlorhexidine gluconate(CHX) (n=7); 5) distilled water (n=2) (control); 6) 0.1%chlorhexidine gluconate (n=2) (control). The apex and coronaryopening were sealed with IRM. Roots were placed in Eppendorftubes with 1 ml distilled water at 37°C and 100% humidity. Atbaseline, 7, 30 and 60 days, pH was measured with pH meter,and calcium ion content in the solution was analyzed by atomicabsorption spectrophotometry. The data were statisticallyanalyzed using ANOVA, simple linear regression analysis andPearson’s correlation test. The highest pH values were achievedwith calcium hydroxide pastes at 60 days (p ≤ 0.05). Calciumions were released in all groups. The calcium hydroxide pastewith distilled water at 60 days had the highest calcium ion value(p ≤ 0.01). There was a positive correlation between calcium andpH values.

El objetivo de este estudio ex vivo fue evaluar los cambios en elpH y la difusión a través de la dentina radicular de iones calcioa partir de pastas de hidróxido de calcio (Ca (OH)2) y trióxidomineral agregado (MTA), durante 7, 30 y 60 días; y la relaciónentre el pH y la difusión de iones. Se utilizaron 32 premolareshumanos. Las coronas fueron seccionadas, los conductos radicu ­lares fueron instrumentados y obturados con las siguientespreparaciones: 1) Ca (OH)2 + agua destilada (n = 7); 2)Ca (OH)2 + gluconato de clorhexidina (CHX) al 0,1% (n = 7);3) MTA + agua destilada (n = 7); 4) MTA + gluconato declorhexidina al 0,1% (n = 7); 5) agua destilada (n = 2) (control);6) gluconato de clorhexidina al 0,1% (n = 2) (control). El ápicey la apertura coronaria se sellaron con IRM. Las raíces secolocaron en tubos Eppendorf con 1 ml de agua destilada a37 °C y 100% de humedad. Se midió el pH inicial y a los 7, 30 y60 días, con pHmetro, y se analizó el contenido de iones calcioen la solución por espectrofotometría de absorción atómica. Losdatos fueron analizados estadísticamente con ANOVA, análisisde regresión lineal y correlación de Pearson. Los valores de pHmás altos se obtuvieron con las pastas de hidróxido de calcio alos 60 días (p ≤ 0,05). Todos los grupos mostraron liberación deiones calcio. La pasta de hidróxido de calcio con agua destiladamostró el valor más alto de iones calcio a los 60 días (p ≤ 0,01).Hubo una correlación positiva entre los valores de pH y calcio.

Removal of calcium hydroxide from Weine Type II systems using photon-induced photoacoustic streaming, passive ultrasonic, and needle irrigation: a microcomputed tomography study

ABSTRACT Objective This study compared the effectiveness of Er:YAG laser-activated irrigation (PIPS), passive ultrasonic irrigation (PUI) with EndoUltra and standard needle irrigation (SNI) in the removal of calcium hydroxide [Ca(OH)2] from the mesial roots of Weine Type II mandibular molars. Material and Methods Thirty mandibular molars were screened by µCT for the presence of mesial roots with complex intra-canal anatomy and a common apical foramen. The teeth were enlarged to a standardized 25/.06 preparation and filled with Ca(OH)2 paste. Specimens were divided into three groups (n=10) according to the technique used for Ca(OH)2 removal: PIPS, at 15 Hz and 20 mJ using a 9 mm long, 600 µm diameter tip; PUI using a 15/.02 tip; and SNI (30 Ga. side-vented needle). Equal volumes of 8.25% NaOCl and 17% EDTA were used in all groups. µCT was used to measure the initial amount of Ca(OH)2 present and to assess the residual volume of Ca(OH)2 following each irrigation protocol. Data were analyzed using Tukey HSD and Kruskal-Wallis tests (α=5%). Results The mean volume of Ca(OH)2 before removal was significantly higher in the coronal third than in the middle and apical third (p<0.001). Ca(OH)2 was similarly removed from the coronal and middle thirds with the three methods used (p>0.05). PIPS (median 0%; IQR: 0-0) showed significant higher Ca(OH)2 removal in the apical third than PUI (median 100%, IQR: 85-100) and SNI (median 47%; IQR: 16-72) (p<0.001). Conclusions PIPS laser-activation was more effective for the removal of Ca(OH)2 from mesial roots of mandibular molars with Weine Type II canal configurations than PUI with EndoUltra and SNI.

Ions Release and pH of Calcium Hydroxide-, Chlorhexidine- and Bioactive Glass-Based Endodontic Medicaments

Abstract This study evaluated pH and release of calcium, sodium and phosphate ions from different medications in human dentin. Fifty premolars were prepared and randomly divided into groups: (CHX) - 2% chlorhexidine gel; (CHX + CH) - CHX + calcium hydroxide PA; (CH) - CH + propylene glycol 600; (NPBG) - experimental niobium phosphate bioactive glass + distilled water; (BG) - bioactive glass (Bio-Gran) + distilled water. The specimens were immersed in deionized water and the pH variations were measured. The quantification of ions in the solutions was made by inductively coupled plasma - atomic emission spectroscopy (ICP/AES) at 10 min, 24 h, 7, 14, 21 and 30 days. The results were analyzed by ANOVA and Tukey`s test, with a significance level of 5%. CH had the highest level of calcium ions release at 30 days, while CHX and BG released more sodium ions. BG, NPBG and CHX released a higher amount of phosphate ions. The pH of CH was significantly higher compared with the other groups. CH favored the greatest increase of pH and calcium ions release. The bioactive glasses released more sodium and phosphate ions and presented an alkaline pH immediately and after 30 days.

Resumo Este estudo avaliou o pH e a liberação de íons cálcio, sódio e fosfato de diferentes medicamentos em dentina humana. Cinquenta pré-molares foram preparados e divididos aleatoriamente em grupos: (CHX) - clorexidina gel 2%; (CHX + CH) - CHX + hidróxido de cálcio PA; (CH) - CH + propilenoglicol 600; (NPBG) - vidro experimental nióbio fosfato bioativo + água destilada; (BG) - vidro bioativo (Bio-Gran) + água destilada. Os espécimes foram submersos em água deionizada e as variações de pH foram mensuradas. A quantificação dos íons nas soluções foi feita por espectrometria de emissão atômica com plasma indutivamente acoplado (ICP - AES) nos tempos de 10 min, 24 h, 7, 14, 21 e 30 dias. Os resultados foram analisados por ANOVA e teste Tukey, com um nível de significância de 5%. Verificou-se que CH a teve a maior liberação íons de cálcio ao final de 30 dias, enquanto CHX e BG liberaram mais íons de sódio. BG, NPBG e CHX apresentaram a maior liberação de íons fosfato. O pH de CH foi significativamente maior em comparação com os outros grupos testados. O grupo CH aumentou o pH e a liberação de íons cálcio. Os vidros bioativos obtiveram uma maior liberação de íons sódio e fosfato e apresentaram pH alcalino imediato e ao final de 30 dias.

Actividad antimicrobiana y biocompatibilidad de los cementos endodónticos a base de hidróxido de calcio / Antimicrobial activity and biocompatibility of calcium hydroxide-based endodontic sealers

Uno de los objetivos de la endodoncia es la eliminación de los microorganismos de la endodoncia es la eliminación de los microorganismos y la prevención de la reinfección en el sistema de conductosradiculares. Una de las fases de la terapia endodóntica que permite laobtención de dichos objetivos es la obturación de los conductos radiculares;esto significa rellenarlos con un material inerte de la manera más hermética posible y un cemento que permita estimular el proceso de reparación apical y periapical. Los microorganismos pueden permanecer en el sistema de conductos radiculares inclusive después de los procesos de instrumentación e irrigación porque pueden presentar una anatomía compleja. En endodoncia, una de las propiedades deseadas en los cementos endodónticos es la acción antimicrobiana, para eliminar las bacterias resistentes. Los cementos a base de hidróxido de calcio son utilizados debido a su acción antimicrobiana y degradación deendotoxinas, entre otras propiedades. Estas premisas nos llevan a larealización de este trabajo, teniendo como objetivo evaluar la actividadantimicrobiana y la biocompatibilidad que presentan los cementos endodónticos a base de hidróxido de calcio a través de una revisión deliteratura. Después de la revisión podemos concluir que los cementosa base de hidróxido de calcio poseen biocompatibilidad y actividad antimicrobiana contra diversos tipos de microorganismos; sin embargo, pueden tener sus propiedades biológicas alteradas dependiendo de la etodología utilizada y del tiempo de aplicación.

One of the aims of endodontics is to eliminate microorganisms and prevent reinfection in the root-canal system. To achieve this, one of the procedures performed in endodontic therapy is the sealing of the root canals. This implies fi lling the root canal with as hermetic an inert material as possible and a sealer that encourages the process of apical and periapical repair. Microorganisms can remain in the root-canal system even after biomechanical preparation and irrigation, as they may have a complex anatomy. In endodontics, one of the desired properties of an endodontic sealer is antimicrobial activity to eliminate resistant bacteria. Calcium hydroxide-based sealers are used due to their antimicrobial activity and role in endotoxin degradation, among other properties. These were the premises that gave rise to this study, which aimed to evaluate the antimicrobial activity and biocompatibil-ity exhibited by a calcium hydroxide-based endodontic sealer based on a review of the literature. As a result of this review, we were able to conclude that while calcium hydroxide-based sealers do display biocompatibility and antimicrobial activity, their biological properties can vary depending on the method used and the time of application.

Effectiveness of NaviTip FX on intracanal calcium hydroxide removal / Efectividad de NaviTip FX para la remoción intracanal de hidróxido de cálcio

Remnants of calcium hydroxide (Ca(OH)2) post-irrigation can compromise cleansing and permeability of dentinal walls in endodontic therapy. The aim of this study was to evaluate effectiveness of irrigation needle NaviTip FX on intracanal Calcium Hydroxide removal. Twenty-two single-rooted human teeth were randomly assigned according to irrigation needle used after calcium hydroxide removal: G1- NaviTip; G2- NaviTip FX, both with n= 9; as well as negative and positive control groups, with n= 2. The samples were analyzed in scanning electron microscopy, with 500x magnification. The difference between groups were analysed by Student t test, for p 0.01. In apical third, G2 group presents better cleaning in comparison with G1 (p= 0.0007). In middle third, no differences between groups were observed. NaviTip FX irrigation needle shows greater effectiveness in removing calcium hydroxide medication than NaviTip needle in the apical third of the canal.

La presencia de hidróxido de calcio post-irrigación compromete la limpieza y la permeabilidad de la pared de la dentina durante el tratamiento endodóntico. El objetivo deste estudio fue evaluar la eficacia de la cánula de irrigación Navitip Fx en la eliminación de hidróxido de cálcio intracanalicular. Veintidós dientes unirradiculares humanos fueron divididos aleatoriamente de acuerdo con la cánula de irrigación, después de la eliminación del hidróxido de calcio, en grupos: G1- Navitip; G2- Navitip FX, ambos con n= 9; así como los grupos de control positivos y negativos, con n= 2. Las muestras fueron analizadas bajo microscopía electrónica de barrido, con magnificación de 500x. La diferencia entre los grupos fue analizada con la prueba t de Student (p 0,01). En el tercio apical, el grupo G2 presentó mejor limpieza en comparación con el grupo G1 (p= 0,0007). En el tercio medio, no se observaron diferencias entre los grupos. La cánula de irrigación Navitip FX muestra una mayor eficiencia en la eliminación de la medicación hidróxido de calcio en comparación con Navitip cánula en el tercio apical del canal.

Drying protocol influence on the bond strength and apical sealing of three different endodontic sealers

Abstract The aim of this study was to evaluate the influence of drying protocols (DP) on the apical sealing (AS) and on the bond strength (BS) of teeth filled with different sealers. The root canals of one hundred and fifty-six roots of maxillary canines were prepared with Reciproc rotary files (R50). The teeth were randomly divided into four groups (n = 39), according to the DP: GI-paper points; GII-70% isopropyl alcohol + aspiration with NaviTip points; GIII-95% ethanol + paper points; GIV-EndoVac + paper points. Each group was divided into subgroups, according to the sealer used: AH Plus, Sealapex and MTA Fillapex, using a single-cone technique. Evaluation of AS and BS was performed with fluid filtration (FF) and push-out (PO) methods, respectively. The PO test consisted of sectioning the roots, and subjecting a single slice from each third to testing and analysis for failure type. The data was submitted to two-way and three-way variance analysis (ANOVA) and Tukey (α = 5%). The AS showed no drying protocol influence. The FF results revealed a statistically significant difference between MTA and Sealapex (p < 0.05) sealers. The BS test values showed that there was no statistical significant difference among the canal thirds (p > 0.05), but that there was such a difference among the sealers (p < 0.05), among the protocols (p < 0.05), and in the interaction between sealers and protocols (p < 0.05). AH Plus revealed the highest BS values among the sealers; the highest BS results for the sealers occurred with the specimens used with isopropyl alcohol, compared with ethanol and EndoVac.